192.168.1.10 It’s default login IP that is reserved for modems or wireless routers. By typing 192.168.1.10 in the address bar of your browser you will get access to the admin interface of your router. 192.168.1.10 is mostly used by brands like HP, Sipura or Uniden.
Not many people know their router IP because in most cases there is only one situation you need the IP 192.168.1.10. That is while the setup process executed by a technician. So you never get in contact with 192.168.1.10.
How to log in the 192.168.1.10 IP address?
Since 192.168.1.10 is a non-routable IP address, it is not visible on the internet. So you don’t need a running internet connection to log in to this IP address. You can log in to 192.168.1.10 IP address by following these simple steps:
Enter https 192.168.1.10 in any browser you prefer from Chrome, Mozilla Firefox, Safari, etc.. You are redirect to a login screen after pressing enter.
The login screen will require you to enter the username and password. If you have previously chosen your custom username or password, enter those.
It is possible that after entering 192.168.1.10 in the URL, you will receive a message as follows:
Should this happen, check the IP address that you have entered in the address bar? If you didn’t enter it correctly, modify it then try once.
But if you find that it is proper and the page is still not loading, then the only explanation is that 192.168.1.10 is not router’s IP address.
To access your router admin panel:
The first step to access your router admin panel is to find out your router’s private IP address. Follow these simple steps to know your router’s private IP address:
For windows users:
Click on start and type cmd to loacte the command prompt. Enter the command ipconfig which will give you information on your device’s IP address. Look for wireless LAN adapter wifi which will have a field default gateway? You will find your router’s IP address here.
In your Mac, go to – system preferences then internet and wireless and then network. After this, click on wifi and then advanced. You will find the TCP/IP tab, and after selecting it, a number of fields will be displayed including router. Here you can get your router’s private IP address.
For Linux users:
You’ll need to use the terminal to fire the command route n. The Kernel IP routing table is a result of this command. There will be a column titled Gateway, under which you will see your router’s private IP address.
After getting your router’s private IP address, you can log in to the router admin panel by simply following the same steps mentioned above enter the IP address in the URL and log in using your username and password.
After logging in to the router admin panel, you can also change your router’s private IP address and set it to 192.168.1.10 or any other valid private IP address that is not being in use by any other device in the local network.
All you have to do is go to the basic setup after logging in, then click on next. If you’re given some instructions regarding network configuration, and when you reach the screen with LAN network configuration.
You can go ahead and replace the last two numbers i.e., the last two octets of the IP address along any number from range 1-254 and click on Apply. Now your router will require a reboot for your changes to take effect after which you can check your router’s private IP address to see if it worked.
Forget router’s user id and password:
These tricks help you to find out, if you forget router’s username and password:
- You don’t know router’s default username and password:
It may be the situation that you are logging in to the router admin panel for the first time and haven’t set your own login credentials. So you will need the default username and password to log in. If you don’t know these details, then you can try one of the following solutions:
Find the router manual that you must’ve gotten when you bought your router, and it will contain the information you require to log in to the router admin panel and to change the default user id as well as password.
If you are unable to find the router guide or manual, then you can search for the manual on Google by using the router’s model number with the word manual.
On some routers, the login credentials are printed on a sticker. You can detect the default username and password on this sticker and use them to log in.
- Forgot router’s custom username or password:
If you have not logged in for a while and forgot to note down the username and password, you had set for your 192.168.1.10 ip router.
Then you can just restore the original factory settings by holding the reset button on the router. After this, you can log in to the router admin interface using the default login credentials.
The barely trouble with this answer is that you will have to take some time to reconfigure your router so it can function just like before.
Troubleshooting issues of 192.168.1.10:
Best wireless channel:
You will find many routers located closely, especially in buildings and offices. If they use the same frequency, then congestion will be a problem for the channel as it will be overused.
So selecting the right channel can be a vital part of the network performance and you can use various Wifi analyzing tools such as Nir Soft Wifi Info View and Solar Winds Wifi analyzer that will give you sufficient information to select the most suitable channel.
Same as electronic devices, overheating can damage routers as well. So check that the vents of the router are working properly and you can clean them every now and then by using compressed air while the router is switch off.
Read More: 19216811routernetworkipaddress
Related Search Terms:
For the IP address 192.168.1.10, most of used or default username and passwords are admin-admin and admin-(blank) respectively.